Différences Casio FX-870P et VX4
Modérateur : Politburo
Différences Casio FX-870P et VX4
Hormis la qualité de l'écran, y a t-il d'autres différences entre ces deux modèles ?
J'ai cru comprendre que malgré son écran de 4 ligne d'affichage (écran graphique), le VX-4 n'a pas d'instructions graphiques standard.
Le FX-870P remédie t-il à cela ?
Autre question : toujours pas d'assembleur possible sur ces machines ?
D'avance merci.
J'ai cru comprendre que malgré son écran de 4 ligne d'affichage (écran graphique), le VX-4 n'a pas d'instructions graphiques standard.
Le FX-870P remédie t-il à cela ?
Autre question : toujours pas d'assembleur possible sur ces machines ?
D'avance merci.
HP : 11C 17BII 28S 48SX 50G 71B LX100
Sharp : PC-1403 PC-1600 PC-G850V
TI : TI-74
Sharp : PC-1403 PC-1600 PC-G850V
TI : TI-74
- charognard
- Fonctionne à 9600 bauds
- Messages : 4412
- Enregistré le : 06 juin 2007 19:28
- Localisation : Indre et loire
- Contact :
Pas d'assembleur
simplement un pseudo assembleur orienté éducation le CASL
La librairie 110 permet de gruger et d'utiliser l'écran graphique et aucunes instructions standard.
et je ne suis même pas sur que la qualité d'écran soit différente entre le VX4 et 870P (contrairement au 890P et Z1) ... à confirmer
simplement un pseudo assembleur orienté éducation le CASL
La librairie 110 permet de gruger et d'utiliser l'écran graphique et aucunes instructions standard.
et je ne suis même pas sur que la qualité d'écran soit différente entre le VX4 et 870P (contrairement au 890P et Z1) ... à confirmer
- charognard
- Fonctionne à 9600 bauds
- Messages : 4412
- Enregistré le : 06 juin 2007 19:28
- Localisation : Indre et loire
- Contact :
Diantre !
Hormis les appellations, pas de différence entre ces deux modèles
Quelle est leur intérêt ?
C'est ue sorte de 880P avec quatre lignes d'affichage ? Pourquoi un écran graphique alors (pourquoi pas 4 lignes de texte comme le PC-E220 ?).
Chris - toute réponse apporte une nouvelle question depuis 1664
Hormis les appellations, pas de différence entre ces deux modèles
Quelle est leur intérêt ?
C'est ue sorte de 880P avec quatre lignes d'affichage ? Pourquoi un écran graphique alors (pourquoi pas 4 lignes de texte comme le PC-E220 ?).
Chris - toute réponse apporte une nouvelle question depuis 1664
HP : 11C 17BII 28S 48SX 50G 71B LX100
Sharp : PC-1403 PC-1600 PC-G850V
TI : TI-74
Sharp : PC-1403 PC-1600 PC-G850V
TI : TI-74
- Paul Tergeist
- Fonctionne à 9600 bauds
- Messages : 2417
- Enregistré le : 15 oct. 2007 15:50
- Localisation : 3ème planète après le soleil
- Xerxes
- Fonctionne à 300 bauds
- Messages : 292
- Enregistré le : 02 avr. 2007 13:41
- Localisation : Allemagne
- Contact :
AFAIK the only difference between the FX-870P and the VX-4 is the color scheme and the built-in
RAM. Surely the educational VX-4 (8K) was cheaper than the commercial FX-870P (32K).
The differences of VX-4 to it's predecessor VX-3 are the color scheme, a slightly different
key layout, totaly different ROM and RAM addresses and the screen indicators.
The Basic dialect of the VX-3/VX-4/FX-870P is very close to the FX-850P series but the hardware is
based on the PB-1000. So it's possible to execute HD61700 ML code on these pockets by using the
already mentioned MODE110 command.
The used LCD (VX-3: 192x32 without indicators / VX-4 and FX-870P: 191x32 with indicators) is also
known from the PB-1000. Graphic access is possible in assembly only, what I cannot understand at all.
Apparently it was cheaper to use the already available graphic LCD, than using or developing a new
text only LCD. All HD61700 based pockets (PB-1000/PB-1000C/PB-2000C/AI-1000/FX-870P/VX-3/VX-4) have
the same LCD and display drivers.
I think Charo's suspicion about the different LCD qualities is right.
RAM. Surely the educational VX-4 (8K) was cheaper than the commercial FX-870P (32K).
The differences of VX-4 to it's predecessor VX-3 are the color scheme, a slightly different
key layout, totaly different ROM and RAM addresses and the screen indicators.
The Basic dialect of the VX-3/VX-4/FX-870P is very close to the FX-850P series but the hardware is
based on the PB-1000. So it's possible to execute HD61700 ML code on these pockets by using the
already mentioned MODE110 command.
The used LCD (VX-3: 192x32 without indicators / VX-4 and FX-870P: 191x32 with indicators) is also
known from the PB-1000. Graphic access is possible in assembly only, what I cannot understand at all.
Apparently it was cheaper to use the already available graphic LCD, than using or developing a new
text only LCD. All HD61700 based pockets (PB-1000/PB-1000C/PB-2000C/AI-1000/FX-870P/VX-3/VX-4) have
the same LCD and display drivers.
I think Charo's suspicion about the different LCD qualities is right.
Ok, thanks Xerses.
That is perfectly clear now. I didn't know for the different RAM capacity between those 2 models.
About the MODE110 command, is there a total control on the machaine (using ML)?
Anyway, the 890P seems to be closer to what I'm looking for.
Chris.
That is perfectly clear now. I didn't know for the different RAM capacity between those 2 models.
About the MODE110 command, is there a total control on the machaine (using ML)?
Anyway, the 890P seems to be closer to what I'm looking for.
Chris.
HP : 11C 17BII 28S 48SX 50G 71B LX100
Sharp : PC-1403 PC-1600 PC-G850V
TI : TI-74
Sharp : PC-1403 PC-1600 PC-G850V
TI : TI-74
- charognard
- Fonctionne à 9600 bauds
- Messages : 4412
- Enregistré le : 06 juin 2007 19:28
- Localisation : Indre et loire
- Contact :
- badaze
- Fonctionne à 14400 bauds
- Messages : 8412
- Enregistré le : 12 févr. 2007 18:36
- Localisation : Pas très loin de Lyon
- Contact :
Mais oui mais oui on te croit !!!!charognard a écrit :personne n'aurait un VX4 à vendre (en état neuf avec la doc) et un module mémoire 32ko par hazard ...
c'est pas pour moi c'est pour un copain
Tout est bon dans le pocket.
Moi j'aime tout.... Casio, HP, Sharp, TI et les autres sauf que les TI semblent ne pas m'aimer
http://www.emmella.fr
Mes Casio - HP - Sharp - TI
Homme invisible.
Moi j'aime tout.... Casio, HP, Sharp, TI et les autres sauf que les TI semblent ne pas m'aimer
http://www.emmella.fr
Mes Casio - HP - Sharp - TI
Homme invisible.
- kweeky
- Fonctionne à 2400 bauds
- Messages : 1777
- Enregistré le : 05 oct. 2007 19:46
- Localisation : Pas très loin de Bordeaux
Tu parles le japonais, Charo ? Parce que le VX-4 n'a apparemment jamais été exporté hors du Japon, donc je ne sais pas si la doc pourra te servir (mis à part pour avoir la liste des commandes disponibles).charognard a écrit :personne n'aurait un VX4 à vendre (en état neuf avec la doc) et un module mémoire 32ko par hazard ...
c'est pas pour moi c'est pour un copain
- charognard
- Fonctionne à 9600 bauds
- Messages : 4412
- Enregistré le : 06 juin 2007 19:28
- Localisation : Indre et loire
- Contact :
je parle courament 96 langues je suis chez free ... j'ai tout compriskweeky a écrit :Tu parles le japonais, Charo ? Parce que le VX-4 n'a apparemment jamais été exporté hors du Japon, donc je ne sais pas si la doc pourra te servir (mis à part pour avoir la liste des commandes disponibles).charognard a écrit :personne n'aurait un VX4 à vendre (en état neuf avec la doc) et un module mémoire 32ko par hazard ...
c'est pas pour moi c'est pour un copain