Have a look here: http://www.silrun.info/casio/pb2000/pb2000.htmMarcus von Cube a écrit :Is there a manual online somewhere?
Tableau de comparaison des mots clefs en BASIC
Modérateur : Politburo
- Marcus von Cube
- Fonctionne à 1200 bauds
- Messages : 914
- Enregistré le : 20 avr. 2006 13:48
- Localisation : Wehrheim, Allemagne
- Contact :
Thanks et Merci !
Le tableau est màj.
Le tableau est màj.
Marcus von Cube
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
- Paul Tergeist
- Fonctionne à 9600 bauds
- Messages : 2417
- Enregistré le : 15 oct. 2007 15:50
- Localisation : 3ème planète après le soleil
Perfect link Xerxes... Like always!Xerxes a écrit :Have a look here: http://www.silrun.info/casio/pb2000/pb2000.htm
Thank you.
Paul
Il y a 10 catégories de personnes dans le monde. Celle qui connait le binaire et l'autre.
- jvernet
- Fonctionne à 14400 bauds
- Messages : 7958
- Enregistré le : 24 mai 2002 09:57
- Localisation : France 69
- Contact :
J'ai les docs du PB2000C en français. j'aurais jamais le temps de les scanner, cela dit... Également (mais en Japonais) celle du VX4, et du FX790.
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
- jvernet
- Fonctionne à 14400 bauds
- Messages : 7958
- Enregistré le : 24 mai 2002 09:57
- Localisation : France 69
- Contact :
Y'a un truc dans ton tableau qui m'interpelle: pour moi, les SHARP PC1246 et 1247 ne disposent pas du CALL. Et le POKE est buggè, on ne peut l'utiliser dans un programme.
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
- charognard
- Fonctionne à 9600 bauds
- Messages : 4412
- Enregistré le : 06 juin 2007 19:28
- Localisation : Indre et loire
- Contact :
il est pas bogué (remarquez l'utilisation de la version française du terme ) il est limité comme PEEK d'ailleur, notament à une zone de RAM et le CALL est inexistant. Bref PAS DE LM sur 1246/47jvernet a écrit :Y'a un truc dans ton tableau qui m'interpelle: pour moi, les SHARP PC1246 et 1247 ne disposent pas du CALL. Et le POKE est buggè, on ne peut l'utiliser dans un programme.
- jvernet
- Fonctionne à 14400 bauds
- Messages : 7958
- Enregistré le : 24 mai 2002 09:57
- Localisation : France 69
- Contact :
Tu ne peux pas utiliser POKE dans un programme (ERROR 3, quelque soit l'emplacement RAM POKé).charognard a écrit : il est pas bogué (remarquez l'utilisation de la version française du terme ) il est limité comme PEEK d'ailleur, notament à une zone de RAM et le CALL est inexistant. Bref PAS DE LM sur 1246/47
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
- charognard
- Fonctionne à 9600 bauds
- Messages : 4412
- Enregistré le : 06 juin 2007 19:28
- Localisation : Indre et loire
- Contact :
c'est ce que je dis, il est Limitéjvernet a écrit :Tu ne peux pas utiliser POKE dans un programme (ERROR 3, quelque soit l'emplacement RAM POKé).charognard a écrit : il est pas bogué (remarquez l'utilisation de la version française du terme ) il est limité comme PEEK d'ailleur, notament à une zone de RAM et le CALL est inexistant. Bref PAS DE LM sur 1246/47
- Marcus von Cube
- Fonctionne à 1200 bauds
- Messages : 914
- Enregistré le : 20 avr. 2006 13:48
- Localisation : Wehrheim, Allemagne
- Contact :
Merci! Quel honeurPocket a écrit :Salut,
J'ai mis ce post en Post-It, car il le vaut bien
A+
Marcus von Cube
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
- Marcus von Cube
- Fonctionne à 1200 bauds
- Messages : 914
- Enregistré le : 20 avr. 2006 13:48
- Localisation : Wehrheim, Allemagne
- Contact :
Je dois le rechercher et corriger mon tableau. Merci pour votre input.charognard a écrit :il est pas bogué (remarquez l'utilisation de la version française du terme ) il est limité comme PEEK d'ailleur, notament à une zone de RAM et le CALL est inexistant. Bref PAS DE LM sur 1246/47jvernet a écrit :Y'a un truc dans ton tableau qui m'interpelle: pour moi, les SHARP PC1246 et 1247 ne disposent pas du CALL. Et le POKE est buggè, on ne peut l'utiliser dans un programme.
Marcus von Cube
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
- Xerxes
- Fonctionne à 300 bauds
- Messages : 292
- Enregistré le : 02 avr. 2007 13:41
- Localisation : Allemagne
- Contact :
All the SHARPs using the 4-bit SC61720 CPU have no CALL and ML. (PC-1110/1140/1150/1246/1246S/1246DB/1247/1248/1248DB/1270)
PEEK and POKE are usable in the RAM area only (e.g. 0-4095 on the PC-1247 and 0-8191 on the PC-1248).
Any address outside gives ERROR 3.
PEEK and POKE are usable in RUN and PRO mode, but there is a bug on some pockets. I have tested the PC-1248
without any problems, but the bug is present on the PC-1247. Fortunately there is a way to avoid it.
10 POKE A,B
20 REM
gives ERROR 1 in 20
10 POKE A,B:REM
gives ERROR 1 in 10
10 POKE A,B
gives ERROR 1 in 00
With other words, the POKE command occurs an ERROR 1 for the next statement, even if there is no further code.
To avoid the bug, a colon after the POKE command is needed:
10 POKE A,B:
20 REM
Now it works!
Maybe the bug was corrected in later machines.
PEEK and POKE are usable in the RAM area only (e.g. 0-4095 on the PC-1247 and 0-8191 on the PC-1248).
Any address outside gives ERROR 3.
PEEK and POKE are usable in RUN and PRO mode, but there is a bug on some pockets. I have tested the PC-1248
without any problems, but the bug is present on the PC-1247. Fortunately there is a way to avoid it.
10 POKE A,B
20 REM
gives ERROR 1 in 20
10 POKE A,B:REM
gives ERROR 1 in 10
10 POKE A,B
gives ERROR 1 in 00
With other words, the POKE command occurs an ERROR 1 for the next statement, even if there is no further code.
To avoid the bug, a colon after the POKE command is needed:
10 POKE A,B:
20 REM
Now it works!
Maybe the bug was corrected in later machines.
- jvernet
- Fonctionne à 14400 bauds
- Messages : 7958
- Enregistré le : 24 mai 2002 09:57
- Localisation : France 69
- Contact :
Thanks. I forget this hint !Xerxes a écrit :All the SHARPs using the 4-bit SC61720 CPU have no CALL and ML. (PC-1110/1140/1150/1246/1246S/1246DB/1247/1248/1248DB/1270)...
Now it works!
Maybe the bug was corrected in later machines.
J'avais exploré la RAM de mon 1247 à coups de PEEK/POKE, avec, par exemple, les zones qui gèrent l'affichage (on/off, laisser l'écran afficher lorsque le pocket calcule (BUSY), la gestion des indicateurs de l'écran. La déprotection ou la protection par mot de passe.
Et un POKE rigolo qui donnait à mon 1247 (4k) l'impression d'avoir 18k de RAM ! J'ai pas gardé les infos... M'enfin, doit y avoir 250 octets à se farcir .
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
- pir2
- Fonctionne à 9600 bauds
- Messages : 4647
- Enregistré le : 31 oct. 2006 15:08
- Localisation : 67310 Westhoffen
- Contact :
Done !pir2 a écrit :Thank you xerces, i now understand why my tests of program transfer from 1251 to 1270 failed.
As you mentionned, the 1270 has only a 4bit processor, i should make a transfer test from my 1246.
A simple basic program runs perfectly from a wire transfert (EA-129C) between A Tandy PC-8 and my 1270.
My first try was unsuccessfull and was done from a 1251 (containing ML code).