yo! quelle est la référence d'un oscillateur a utiliser avec un copro 68881/16?
help!
oscillateur pour 68881
Modérateur : Politburo
- mirage4
- Fonctionne à 9600 bauds
- Messages : 2922
- Enregistré le : 30 déc. 2004 19:39
- Localisation : Langon (33)
oscillateur pour 68881
Attention ! psychoordinopathe!
- gilles
- Fonctionne à 9600 bauds
- Messages : 3100
- Enregistré le : 17 avr. 2007 21:25
- Localisation : 44
- Contact :
visiblement cela dépend surtout du design de la carte en question...
le fpu peut etre synchrone ou non avec le 68030
http://amiga.resource.cx/exp/mbx1230
y'a meme le manuel...
le fpu peut etre synchrone ou non avec le 68030
http://amiga.resource.cx/exp/mbx1230
y'a meme le manuel...
- stamba
- Fonctionne à 1200 bauds
- Messages : 705
- Enregistré le : 29 mars 2005 11:30
- Localisation : Bordeaux - FRANCE
- Contact :
Cette carte la ?
FPU -record which type of FPU (math chip) is installed.
Permissible entries are: none, 68881, and 68882
FPUSPEED n -record the clock speed of the FPU.
Allowable values are: 20, 25, 33, 40, 50, and 60.
Et la doc :
http://amiga.resource.cx/manual/M1230XA.pdf
FPU -record which type of FPU (math chip) is installed.
Permissible entries are: none, 68881, and 68882
FPUSPEED n -record the clock speed of the FPU.
Allowable values are: 20, 25, 33, 40, 50, and 60.
Et la doc :
http://amiga.resource.cx/manual/M1230XA.pdf
- gilles
- Fonctionne à 9600 bauds
- Messages : 3100
- Enregistré le : 17 avr. 2007 21:25
- Localisation : 44
- Contact :
dans la doc, un jumper permet d'avoir FPU clk=CPU clk mais dans ton cas ce n'est pas une bonne option...mirage4 a écrit :je l'ai mais je ne vois rien pour l'oscillateur.
Tu dois avoir un oscillateur 33MHz pour ton CPU,
je suppose qu'il faut mettre un oscillateur 20MHz et mettre le jumper sur la position d'horloges séparées...
- mirage4
- Fonctionne à 9600 bauds
- Messages : 2922
- Enregistré le : 30 déc. 2004 19:39
- Localisation : Langon (33)
exactementstamba a écrit :Cette carte la ?
FPU -record which type of FPU (math chip) is installed.
Permissible entries are: none, 68881, and 68882
FPUSPEED n -record the clock speed of the FPU.
Allowable values are: 20, 25, 33, 40, 50, and 60.
Et la doc :
http://amiga.resource.cx/manual/M1230XA.pdf
Attention ! psychoordinopathe!