Salut,une news datant de fin mars 2006 :
Curt Vendel of The Atari Historical Society has revealed the specifications of the next line of the Flashback dedicated consoles. The Flashback 3 will be a 800 computer in a 5200 case. Here are the known features of the unit:
There will be function keys/buttons along under the silver strip for pause, select, keypad, etc.
FB2 joystick usage
Front SD card slot acting as D1:
edge connector inside on board to solder an 800 cart connector to for legacy cartridge usage.
Built in SIO2PC connection port for transferring to/from console
footprint for SIO connector to be added
footprint for ps/2 keyboard connector
footprint for vga out
Composite out
Games included will come on an SDcard
Curt Vendel was responsible for the Flashback 2 unit, which used genuine Atari hardware rather than the Nintendo Entertainment System hardware that was in the original Flashback. Due to Atari's current financial troubles, Curt stated that he may have to release the unit independent of Atari. The 800 system has been released to the public domain, so there will be no legal troubles in him doing so.
atari flashback III
Modérateur : Politburo
-
sidchip_fr
- Fonctionne à 300 bauds
- Messages : 296
- Inscription : 24 févr. 2003 01:24
-
rhod
- Fonctionne à 9600 bauds
- Messages : 4723
- Inscription : 01 juil. 2002 11:27
- Localisation : Orléans
- Contact :
oula, miam ca 
trouvé ca
http://www.atariage.com/forums/index.ph ... opic=74783
That was what was being shot for, much of the VHDL work on several of the chips went through first pass work and I have in fact tapped a few people from the community to help on the completion of the chipset and need to send out appropriate chip schem's on the 800 for some additional work to be done.
I just need to wrap up some business through April 18-19 I will be free to more aggressively persue this with the resources in the community to make this happen for us.
trouvé ca
http://www.atariage.com/forums/index.ph ... opic=74783
That was what was being shot for, much of the VHDL work on several of the chips went through first pass work and I have in fact tapped a few people from the community to help on the completion of the chipset and need to send out appropriate chip schem's on the 800 for some additional work to be done.
I just need to wrap up some business through April 18-19 I will be free to more aggressively persue this with the resources in the community to make this happen for us.
http://www.rhod.fr
Blog : http://rhodblog.wordpress.com/
Twitter : https://twitter.com/#!/rhodblog
Mes recherches ATARI 8 BIT
Temple of Apshai Trilogy CPC et C64 DISK version d3m, boite plastique carrée
ATARI PC-1 / Moniteur CBM 1084DS2 noir
JC
Blog : http://rhodblog.wordpress.com/
Twitter : https://twitter.com/#!/rhodblog
Mes recherches ATARI 8 BIT
Temple of Apshai Trilogy CPC et C64 DISK version d3m, boite plastique carrée
ATARI PC-1 / Moniteur CBM 1084DS2 noir
JC
