Après une petite heure de galère....

Tout sur les ordinateurs, liens, infos...Avec un thread par machine. Si la machine n'y est pas , créez le premier post la concernant dans ce forum

Modérateur : Politburo

Répondre
francoisp31
Fonctionne à 2400 bauds
Fonctionne à 2400 bauds
Messages : 2002
Enregistré le : 30 mai 2005 09:48
Localisation : Toulouse
Contact :

Après une petite heure de galère....

Message par francoisp31 »

conflits scsi .... un disque HS...
une fois tout ça réglé....
un petit upgrade de ram pour ajouter 128Mo que j'ai en stock....

et enfin ....
un petit SEA
un petit boot p2
un petit reboot en fin d'installation
un petit sea
un petit boot p1
et....

Code : Tout sélectionner

# dmesg 
[ using 409176 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 5.6 (GENERIC) #181: Fri Aug 8 04:18:33 MDT 2014
deraadt@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/803/D220 (UltraLight L2 132) PA-RISC 1.1e
real mem = 402653184 (384MB)
rsvd mem = 524288 (512KB)
avail mem = 386641920 (368MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0 offset 140000
cpu0 at mainbus0 offset ffbe000 irq 31: PCXL2 L1-A 132MHz, FPU VR rev 1
cpu0: 64K(32b/l) Icache, 64K(32b/l) wr-back Dcache, 96 coherent TLB
mem0 at mainbus0 offset ffbf000: viper rev 10, size 384MB, 1MB L2 cache
phantomas0 at mainbus0 offset fc00000
wax0 at phantomas0 offset fe00000 irq 24
gsc2 at wax0
"WAX EISA Bus Adapter" at gsc2 (type b sv 90 mod 3 hv 0) offset 0 not configured
com1 at gsc2 offset 2000 irq 6: ns16550a, 16 byte fifo
lasi0 at phantomas0 offset fd00000 irq 28: rev 3.0
gsc0 at lasi0: wordleds
gsckbc0 at gsc0 offset 8100 irq 26
gsckbc1 at gsc0 offset 8000 irq 26
ie0 at gsc0 offset 7000 irq 8: LASI/i82596CA v2.0, address 08:00:09:fd:2c:2c
osiop0 at gsc0 offset 6000 irq 9: NCR53C710 rev 2, 40MHz
scsibus1 at osiop0: 8 targets, initiator 7
osiop0: target 2 now using 8 bit 10 MHz 8 REQ/ACK offset xfers
cd0 at scsibus1 targ 2 lun 0: <PIONEER, DVD-ROM DVD-303, 1.04> SCSI2 5/cdrom removable
com0 at gsc0 offset 5000 irq 5: ns16550a, 16 byte fifo
com0: console
lpt0 at gsc0 offset 2000 irq 7
siop0 at phantomas0 offset ff84000 irq 3: NCR53C720 rev 4
scsibus2 at siop0: 16 targets, initiator 7
sym0 at scsibus2 targ 5 lun 0: <SEAGATE, ST318275LC, HP03> SCSI2 0/direct fixed serial.SEAGATE_ST318275LC_3AK041AT000079432H8N
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318275LC, HP03> SCSI2 0/direct fixed serial.SEAGATE_ST318275LC_3AK041AT000079432H8N
sd0: 17366MB, 512 bytes/sector, 35566480 sectors
sym1 at scsibus2 targ 8 lun 0: <SEAGATE, ST318275LC, HP03> SCSI2 0/direct fixed serial.SEAGATE_ST318275LC_3AK044E600001936JU7F
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST318275LC, HP03> SCSI2 0/direct fixed serial.SEAGATE_ST318275LC_3AK044E600001936JU7F
sd1: 17366MB, 512 bytes/sector, 35566480 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
siop0: target 5 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
siop0: target 8 now using tagged 16 bit 10.0 MHz 8 REQ/ACK offset xfers
bootpath: 8/4.5 class=1 flags=0 hpa=0xfff84000 spa=0x0 io=0xc000
root on sd0a (e8245a4e1febe10d.a) swap on sd0b dump on sd0b
#
# sysctl hw
hw.machine=hppa
hw.model=HP 9000/803/D220 (UltraLight L2 132) PA-RISC 1.1e
hw.ncpu=1
hw.byteorder=4321
hw.pagesize=4096
hw.disknames=cd0:,sd0:e8245a4e1febe10d,sd1:8ce60f116689c2c8
hw.diskcount=3
hw.cpuspeed=132
hw.physmem=402653184
hw.usermem=402640896
hw.ncpufound=1
hw.allowpowerdown=1
#

taDaaaaaa.....

:ugeek:

plus d'infos cet APM
http://www.openpa.net/systems/hp-9000_d ... class.html

http://www.geocities.jp/amon_junk/img/comp/D220_1_1.jpg

https://www.youtube.com/watch?v=bcIAxM_WN08

https://www.youtube.com/watch?v=2XI1KLItm3c
-----------
ssh debile@stupide.local "docker run -it docker/cowsay \"fortune | cowsay\" "

:ugeek:
Avatar du membre
doudou
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 273
Enregistré le : 07 août 2013 13:36
Localisation : Grenoble

Re: Après une petite heure de galère....

Message par doudou »

:ugeek:
Roads? Where we're going, we don't need... roads.
Répondre

Retourner vers « Tous les ordinateurs »