[CLOSED] SHARP PC-1600 USB-Stick Interface Module

Les collectionneurs avides de tractations pourront s'informer des avis présentés. Répondez en priorité sur le topic, concluez en MP ou par mails.

Modérateur : Politburo

Répondre
Avatar du membre
Atlantis
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 84
Enregistré le : 24 janv. 2013 19:47
Localisation : Seine et Marne (77)
Contact :

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par Atlantis »

Bonjour

Je viens d'acquérir ici-même (auprès de CGH, merci à lui ;-) un magnifique 1600, donc si c'est encore possible, merci de m'ajouter à la liste.

Amicalement
ES
Il y a 10 sortes de gens, ceux qui comprennent le binaire et les autres.

ATHANOR - Trilogie, Jeu d'aventure 8bits - Disponible sur Oric, Amstrad, Commodore 64
Épisode 2 : Athanor - La légende des hommes-oiseaux disponible sur Amstrad, Atari et Amiga.
http://www.safargames.fr
spellbound
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 102
Enregistré le : 06 mai 2015 12:06

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par spellbound »

elettrosurplus a écrit : 25 janv. 2023 09:29 I have used JCLPCB to made some Vextreme board (20) for my club. They made boards fast and perfectly. They don't made double face SMD mounting, and you have to use chips and parts from JLC inventory. You have to build a BOM list with codes and part ref. from JLC inventory, and build a centroid positional scheme for parts, with orientation. This is easy if you use Kicad, JLC check next if the parts are correctly positioned, since it's a bit difficult to know what are starting angles ... I have missed some, wrongly rotated, but corrected by JLC engineers. Another issue is that JLC don't install parts like USB sockets, even if SMD. I have then hand soldered other side and USB-C connector on the half populated board. All boards worked perfectly at first attempt.
The cost is low, but you pay a surplus if use uncommon components (other than resistor/caps) as reel changing fee, so using part of same value minimize costs.

Max
Thanks for sharing your experience!
Currently my layout is double sided, so there is work to be done. Also I have to switch to KiCad (which I have planned for some time).
What really makes the (manual) production time consuming is the soldering of the PLCC28 and PLCC32 SMD sockets.
I really hope that this can be automated (not sure).
spellbound
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 102
Enregistré le : 06 mai 2015 12:06

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par spellbound »

Harald produced a liitle video of the unit in use:
https://www.sharp-pc-1600.de/aktuell_sparkle.html
Nice 8)
herebedragons
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 1
Enregistré le : 24 févr. 2023 13:42

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par herebedragons »

Bonjour! Hello from England! Am I too late to be put on the list for this wonderful device? Thank you!
spellbound
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 102
Enregistré le : 06 mai 2015 12:06

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par spellbound »

You‘re not too late ;-)
@all:
Currently I‘m very busy in the job - but I need to do a PCB re-design for automated assembly - otherwise I had no chance to handle the demand.
I think I have to postpone the project to the second half of 2023. But of course I‘ll save the waiting list in case this thread fades out.
I‘ll keep you updated.
Avatar du membre
badaze
Fonctionne à 14400 bauds
Fonctionne à 14400 bauds
Messages : 8385
Enregistré le : 12 févr. 2007 18:36
Localisation : Pas très loin de Lyon
Contact :

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par badaze »

Hello,
There’s no hurry.
:D
Tout est bon dans le pocket.
Moi j'aime tout.... Casio, HP, Sharp, TI et les autres sauf que les TI semblent ne pas m'aimer :(
http://www.emmella.fr
Mes Casio - HP - Sharp - TI
Homme invisible.
leduigou
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 109
Enregistré le : 28 mai 2011 14:46
Localisation : Paris

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par leduigou »

Hi,

Can you please also add me in your waiting list ? This little interface seems very useful. No hurry !

Br
Frederic
Cordialement
Frédéric
rprosperi
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 1
Enregistré le : 05 mars 2023 16:50

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par rprosperi »

I have registered and confirm my interest in one of these devices.

I am located in USA (NY).

In the list, my name (originally submitted by pscote as I was traveling) is shown in brackets, so I'm simply confirming here to clarify.

Looking forward to this, even if delayed by parts availability or just be the rest of real life.

Thanks!
dl2kuh
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 3
Enregistré le : 20 mars 2023 21:57

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par dl2kuh »

Hello Tom,
please put me on the Waiting list for Sharp PC-1600 MEP USB-Stick Interface.

It is for my pc-1600

Best regards Hagen (Germany)
volange
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 2
Enregistré le : 11 mai 2023 22:56

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par volange »

Hello Tom,

please put me on the Waiting list for Sharp PC-1600 MEP USB-Stick Interface.

It is for my pc-1600

Best regards Volker from austria
trifahrer
Fonctionne à 75 bauds
Fonctionne à 75 bauds
Messages : 2
Enregistré le : 14 juil. 2023 16:24

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par trifahrer »

Hallo Tom,

setze mich auf die Warteliste für das Interface Modul, auch hier egal ob als Bausatz oder Fertigmodul.

Viele Grüße
Jörg
Avatar du membre
jvernet
Fonctionne à 14400 bauds
Fonctionne à 14400 bauds
Messages : 7958
Enregistré le : 24 mai 2002 09:57
Localisation : France 69
Contact :

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par jvernet »

hello

Interessé également !
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
spellbound
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 102
Enregistré le : 06 mai 2015 12:06

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par spellbound »

Hello all,
There are some news :-)
It was a very busy year in the job, but in last 2 months I found some time to redesign the PCBs for automated assembly, which is a necessary precondition for a small series (some connectors and the USB-host controller IC need to be hand soldered, but thats no problem). I placed a small prototype order at JLCPCB and it seems they can manufacture it - work in progress. Hopefully in a week or so, I‘m holding the first test units in my hand. If the hardware is error free, I then will port the embedded software to the new microcontroller (ATmega32A instead of ATmega328P - with that I can utilize an external oscillator in the backend, which is much more precise and provides a stable serial connection even with higher baud rates).
If everything is fine, a buddy of mine will care about the 3D-printed shells for the unit and give me a price tag.
Ideally I think in 2-3 weeks or so I‘m able to calculate final prices and will start the definite ordering process then.
Stay tuned!
All the best
Tom
Avatar du membre
Dom
Fonctionne à 2400 bauds
Fonctionne à 2400 bauds
Messages : 1366
Enregistré le : 26 oct. 2018 18:45
Localisation : Ile-de-France

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par Dom »

Great news !
Thank you for the update, Tom !
Moi, c'est les poquettes, et la Coll'à'Dom, c'est
Blitter
Fonctionne à 300 bauds
Fonctionne à 300 bauds
Messages : 121
Enregistré le : 04 févr. 2021 22:02

Re: Waiting List for SHARP PC-1600 USB-Stick Interface Module

Message par Blitter »

Thank you for these good news!
Répondre

Retourner vers « Je donne, j'échange, j'achète et je vends [réservé aux membres actifs] »