Hi Casio BASIC pocket computer owners!
I've written some utilities to handle images from tapes (trough soundcard) or MD-100 floppies:
http://www.mvcsys.de/doc/casioutil.html
Enjoy!
New Casio Tape Utilities
Modérateur : Politburo
- Marcus von Cube
- Fonctionne à 1200 bauds
- Messages : 914
- Enregistré le : 20 avr. 2006 13:48
- Localisation : Wehrheim, Allemagne
- Contact :
New Casio Tape Utilities
Marcus von Cube
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
- jvernet
- Fonctionne à 14400 bauds
- Messages : 7958
- Enregistré le : 24 mai 2002 09:57
- Localisation : France 69
- Contact :
Re: New Casio Tape Utilities
(C'est pas le bon topic).Marcus von Cube a écrit :Hi Casio BASIC pocket computer owners!
I've written some utilities to handle images from tapes (trough soundcard) or MD-100 floppies:
http://www.mvcsys.de/doc/casioutil.html
Enjoy!
Nice job ! About the MD100, no one can help to make mine working ? Doesn't power on, but is recognized by my PB1000 ou PB2000....
Jerome
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
- Marcus von Cube
- Fonctionne à 1200 bauds
- Messages : 914
- Enregistré le : 20 avr. 2006 13:48
- Localisation : Wehrheim, Allemagne
- Contact :
Hi Jerome,
You need to supply enough power. I've connected a switching power supply with 800mA @ 9V. The LED lights up *green* when the pocket is powerd on. A red LED signifies to little current.
Le MD-100 demande assez de courant. J'ai branché le mien avec un alimentation de 800mA à 9V. Le temoin doit s'allumer en *vert*, pas en *rouge*.
You need to supply enough power. I've connected a switching power supply with 800mA @ 9V. The LED lights up *green* when the pocket is powerd on. A red LED signifies to little current.
Le MD-100 demande assez de courant. J'ai branché le mien avec un alimentation de 800mA à 9V. Le temoin doit s'allumer en *vert*, pas en *rouge*.
Marcus von Cube
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
- jvernet
- Fonctionne à 14400 bauds
- Messages : 7958
- Enregistré le : 24 mai 2002 09:57
- Localisation : France 69
- Contact :
Interesting... I do not have the original power supply, so I use a 1.5A power supplyat the rate that is written on the MD100, without success. No more success with fresh battery.Marcus von Cube a écrit :Hi Jerome,
You need to supply enough power. I've connected a switching power supply with 800mA @ 9V. The LED lights up *green* when the pocket is powerd on. A red LED signifies to little current.
Le MD-100 demande assez de courant. J'ai branché le mien avec un alimentation de 800mA à 9V. Le temoin doit s'allumer en *vert*, pas en *rouge*.
I saw that there is some power on the board, but the light doesn't lights red or green.
I may try with a different power supply.
Jerome
"l'ordinateur et l'homme sont les deux opposés les plus intégraux qui existent. L'homme est lent, peu rigoureux et très intuitif. L'ordinateur est super rapide, très rigoureux et complètement con."
- Marcus von Cube
- Fonctionne à 1200 bauds
- Messages : 914
- Enregistré le : 20 avr. 2006 13:48
- Localisation : Wehrheim, Allemagne
- Contact :
Jerome,
sorry to hear that your MD-100 has these problems. It might be a brocken connector. Let's continue the discussion in the French forum.
Je dois pratiquer en Français!
sorry to hear that your MD-100 has these problems. It might be a brocken connector. Let's continue the discussion in the French forum.
Je dois pratiquer en Français!
Marcus von Cube
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S
Wehrheim, Allemagne
http://www.mvcsys.de
CASsette IO utilities
BASIC comparison sheet
WP 34S